Services

« Go to back

Manual

HOW TO USE:

 

CHOOSE AUTOMATIC VOLTAGE STABILIZER:

Need to purchase machines Stabilizers True type voltage range suitable work and enough capacity.

Voltage: Normal simply select models with the voltage range from 90V to 240V work is enough. Where power is too weak, they must choose from a wide range 60V, 40V to 240V.

Capacity: Attention must be sufficient under the nominal capacity of the equipment used through the voltage regulator, to increase the reliability and efficiency of the voltage regulator; do not use more than 80% capacity of the voltage regulator.

INSTALLATION:

Preparation: Choose a good conductor and big enough. For example, using VC 3.0 Solid wire (diameter 2.0 mm) machine 2KVA; Using VC 5.0 Solid wire (diameter 2.5 mm) machine 3KVA. If the wire is too small compared to the required pressure drop on the line, the greater will reduce the capacity of the machine (where the wire to go too far> 30m rope to use more than 2 times the pressure drop calculations to avoid) .

Installation: Place the plant in a cool place, and dry, easy to observe.

· Power on: Connect the power grid into piles INPUT (rear). Pile 110V 110V grid; Pile 220V 220V grid.

· Power output: OUTPUT Retrieved from piles or from the socket to power small devices.

· Grounding: Grounding wires are needed, connect the chassis to earth (in any public bolts on the cover).

Close the electricity, the POWER switch to the ON position. Stable idling for about 5 seconds, then turn on the power-electronic equipment used.

USE NOTICE:

· Do not overload.

· When should take extraordinary mesh devices used to cut off the voltage regulator, when the power will turn on again.

· Do not place objects on the machine, especially the objects containing liquids, easy to pour, flammable, ...

· Do not leave wet or rain turned into a machine.

· Do not move the machine when the power.

· With regard to the voltage regulator 300VA and 600VA capacity Relay does not use a computer or device with a large inrush current (motor, refrigerator, ...)

 

Would like to thank YOU HAVE GOODWILL &


SUPPORTED PRODUCTS JENSIN®

 

iconMore Articles

CUSTOMER SUPPORT

0909 384 426

0937 352 185

028 3853 8215

Mrs. Thao

New Product

IMAGES OF OPERATION